by Jon Crowley on 25/08/13 at 6:42 am
The New GMZ Sand Strippers are designed specifically for the Side x Side market to be used in the sand dunes. These tires were tested in the Southern California desert. The Sand Stripper tires increase the performance of these machines in small sand areas to the biggest sand dunes in the world. They create an amazing amount of flotation and keep you up on top of the sand with great turn ability and traction. The Sand Strippers are all 6-ply rated radial construction tires. GMZ makes special wider wheels with sand offsets built and designed for these tire to maximize the Sand Stripper performance.
The 28×12-14 Front 3 Rib Sand Stripper Turning Tire, helps steer and turn in the soft sand better than every other tire on the market. Designed specific to help even the long wheel base of 4 seat vehicles turn into the corner and make transitions from sand dune to sand dune easier and safer to maneuver.
For the 28×15-14 Rear Sand Tire there are two choices in the Sand Stripper tires. There is the standard Sand Stripper that is a 14 paddle stagger cut that can be for standard to lower powered cars or for more fun sliding the rear of the car around with great floatation. The 14 paddle stagger cut has ¾ tall paddles and hooks up great in the sand. Tire Weight 20.5 lbs
The 28×15-14 Rear HP Sand Stripper tire is the same size tire with more paddle that is taller than the standard Sand Stripper. The HP is more aggressive and has more grip over the standard Sand Stripper model. Designed for the higher powered machines with more horse power this tire has 14 full length paddles that measure 1 1/8” tall. A lot of the difference in the two rear tires is driver preference and the machine itself. If you need help picking the rear tire for your application, contact your local tire expert or GMZ Race Products for more information. Tire Weight 21.7 lbs
28X12-14 FRONT 3 RIB TURNING TIRE
New front three rib tread design offers superior turning ability with excellent flotation.
28X15-14 REAR PADDLE TIRE AVAILABLE IN TWO DIFFERENT CUTS
Option 1 is 14 paddle stagger cut ¾ tall paddle for more sliding and less grip.
Option 2 is 14 paddle full length aggressive paddle with 1”1/4 tall paddle for higher powered machines 20.5lbs.
14×10 REAR VENOMOUS WHEEL
AN INDUSTRY FIRST FOR A CAST ALUMINUM WHEEL
Only 13lbs. with a 1000 lbs load rating.
Built for the Sand in 5+5 Special offset to match up with 14×8 4+4 front Venomous Wheel.
Weighing only a ½ pound more than comparable Spun Aluminum wheels but with higher load rating & Half The Cost….
May require fender modification for some stock vehicles.
Follow on facebook at: facebook.com/GMZRaceProductsInc